The Leister IGNITER ignition blower was specifically developed for installation in pellet and wood-chip boilers.
IHS offers Leister’s full line of industrial process heaters, blowers and controllers. These products can be used across a variety of industrial processes to dry, dissolve, weld, shrink, activate, deburr and more.
Click here to download the full Leister Process Heat Catalog, or on any of the products below to find descriptions, resources, part diagrams, accessories and more, or if you need service or support for your Leister process heating equipment, contact our authorized Leister service center.
Need Help Finding the Right Process Heat Source?
The VULCAN System offers the same outputs as the VULCAN E with the added benefit of a control interface for integration into a control system.
The giant of the Leister air-heater family, the LHS 91 is built for the most demanding heating applications, and is capable of replacing many gas-fired heaters.
The LHS 61 is available in two versions (S and L), offering flexibility in terms of heat to air-volume potential. It's capable of reaching temps up to 1,202°F.
With air temps up to 1,202°F, the mid-sized LHS 41 is ideal for a wide range of applications, and its small footprint allows for easy integration into a variety machines.
The HOTWIND System offers the same capabilities as the Premium, but with a digital display and control interface for integration into control systems.
Capable of reaching air volumes up to 31.8 cfm and temperatures as high as 1,472°F, the HOTWIND Premium is a versatile hand-tool or tabletop unit.
Used with the DSE Three-Phase Adjustment Unit for reference voltage operations.
Accessory to connect external control and temperature regulation systems to a SYSTEM interface.
Improve hot air processes. Allows for air volume and heating performance to be set independently.
Makes it simple to precisely regulate the temperature of air heaters and hot air blowers.
Precisely regulate the temperature of air heaters and hot air blowers. Includes two independent alarm outputs.
Three-phase adjustment unit can steplessly control the power of non-electric air heaters.
By combining heat absorption and convection, the AIR RADIATION HEATER takes large-area drying and targeted heat input applications to the next level.
Not recommended for new designs. Leister recommends the LHS 61L as an alternate.
Not recommended for new designs. Leister recommends the LHS 41 or LHS 61S as an alternate.
Not recommended for new designs. Leister recommends the LHS 41 as an alternate.
Not recommended for new designs. Leister suggests the LHS 21 instead.
Not recommended for new designs. Leister recommends the LHS 15 as an alternate.
The LE 5000 DF is a double-flange air heater for integration into air-duct systems. It can be used with air temps as high as 320°F, and offers a max. air outlet temp of 1,292°F.
Like the LE 5000 DF, the LE 10000 DF is intended for air-duct systems and handles inlet air temps as high as 320°F. It can reach air outlet temps of 1,652°F.
The hottest air temps of all Leister air heaters, the LE 5000 HT reaches up to 1,652°F. It requires a min. airflow of 22.4 cfm, and weighs 4.96 lbs.
Like the LE 5000 HT, the LE 10000 HT can reach extreme hot-air temps (up to 1,652°F). It requires a min. airflow 29.3 cfm, and weighs 8.8 lbs.
The world’s smallest air heater, the LE MINI can reach temps up to 1,112°F, or operate at air pressures up to 29 psi.
Tiny and reliable, the LHS 15 can reach air temps up to 1,202°F, or work at a max. inlet pressure of 29 psi.
The LHS 21 is distinguished by its small dimensions and long service life. This air heater can reach temps up to 1,202°F, or work at air pressures up to 29 psi.
The VULCAN E is the most powerful Leister hot-air blower, capable of reaching temperatures up to 1,202°F and a max airflow of 52 cfm.
The HOTWIND S is a lightweight, versatile hot-air blower. It is the predecessor to the HOTWIND Premium and HOTWIND System
The MISTRAL Systems offers the same features as the MISTRAL with the added benefit of an interface cable for connection to an external control system.
The MISTRAL is a small, compact hot-air blower ideal for most confined and tight areas. It can reach air temps up to 1,202°F and air volumes up to 12.4 cfm.
The compact MONO blower can reach airflows up to 32 cfm — yet it is small enough for mounting in confined spaces.
The ROBUST combines a compact design with significant power, offering airflow potentials up to 46 cfm. It is virtually indestructible, even under extreme conditions.
The giant of the Leister blower family, the ASO can reach airflows up to 560 cfm and supply several Leister air heaters in parallel.
Ergonomically designed, the SONORA S1 offers fatigue-free shrinking, vehicle wrapping, forming and heating, and can reach temps as high as 1,202°F.
The most powerful Leister hot-air heat gun, the FORTE S3 reaches temps up to 1,202°F and is ideal for flameless shrinking of pallets and bulky goods.
Ergonomically designed, the GHIBLI offers strain-free operation while welding or shrinking with hot-air temps up to 1,112°F.
Powerful and versatile, the ELECTRON offers hot-air temps up to 1,202°F and is construction-site tried and tested.
The most compact Leister hot-air hand tool, the HOT JET S is lightweight and slimly designed, ensuring fatigue-free welding without sacrificing heat or power.
Makes it easy to regulate the air temperature of heaters and hot air blowers. It is perfectly matched for six Leister tools.
Powerful and quiet, the SILENCE can reach airflows up to 212 cfm while staying below 61 dB(A) during operation.
The TRIAC PID offers the same features as the TRIAC S with the added benefit of a digital display that shows both set and actual hot-air temperatures.