1/16 DIN Fuzzy Logic Controller

The FuzyPro 1/16 DIN Fuzzy Logic Temperature Controllers can easily be configured to provide precise control. The advanced Smarter Logic "Fuzzy" allows processes to be controlled better than ever before, with virtually no initial overshoot or temperature variations. 

As the control detects a process disturbance the fuzzy logic continuous decision making function quickly returns the process value to the setpoint. A single ramp/soak function prevents rapid temperature changes that could damage the product being heated. An optional dwell timer enables an event to be timed on or off when preset temperature is attained. In addition self-diagnostic capabilities, sensor linearization and cold junction compensation are all performed by the powerful, single chip microprocessor.

FuzyPro 1/16 DIN Fuzzy Logic Controllers Features:

  • 48mm by 48mm Smarter Logic for superior control 
  • Automatic tuning of PID parameters 
  • Splash & chemical resistant sealed mylar front panel
  • External lockout PID heating and PID cooling 
  • A11 control parameters front panel adjustable 
  • Auto/manual operation, F or C display, 3 year warranty
  • Selectable input, optional alarm or on/off delay timer 

FuzyPro 1/16 DIN Fuzzy Logic Temperature Controllers Specifications:

INPUT 
Thermocouple Type J,K,T,E,B,R,S,N (selectable) 
RTD PT 100 ohm(DIN or JIS) 
Linear -10-60mV Configurable input other voltage or current 
Display  In temperature or engineering units 
OUTPUT
Relay SPST relay rated 3A, 240V maximum resistive load 
Pulsed Voltage  32VDC, 20mA maximum ohms
Current 4-20mA, 0-20mA maximum load 500 ohms 
Voltage 0-10V minimum load 500K ohms 
Alarm 14 selectable alarm modes; Process deviation and band, SPST relay rated 2A, 240V maximum resistive load with adjustable hysteresis
CONTROL FEATURES 
Temp Range  Selectable
Set Point  Full Range Adjustable
Alarm Set Point Controls can be configured as On/Off Proportional(P)
Proportional with manual reset
Proportional/Integral(PI)
Proportional Derivative(PD)

Proportional/Integral/Derivative(PID)
Proportional Band:O-100% of span
Control Modes Selectable control modes
On/Off, Proportional (P),
Proportional/Integral (P/I),
Proportional with manual reset,
Proportional derivative (PD),
Proportional/Integral/Derivative (PID)
Proportional Band 0 - 100% of span
Manual Reset 0 to (P x span/100) 
Integral (Reset) 0 to (P x span/100) 
Derivative (Rate) 0 - 1000 seconds
Anti-Reset Wind-Up 0 - 1000 seconds
On / Off Adjustable hysteresis from 0-25.5% of span
Manual Mode Configurable as open loop control should sensor no longer function.
Cycle Time 0 - 120 seconds
Sensor Break Protection Configurable status of control and alarms
Control Action Selectable-Direct action for cooling Reverse action for heating
INDICATION
Display  4 digit red 1/2-in. LED Process Value Display. 
Green 3/8-in. LED Set Value display 
Selectable decimal placement for normal or high resolution display. Example 0000; 000.0; 00.00; 0.000
Status Indicator  2 LED's Output: Green Alarm: Red
Sample Rate 333 milliseconds F/C: Selectable
Power Supply 80-26OVAC, 50/60Hz Consumption: less than 5VA 
Data Retention 10 years (EEPROM)
Control Stability 0.15% (typical) of full scale 
Accuracy ±0.25% of range: ±-1°C or 0.5% in high resolution 
Cold Junction Compensation 0.1%/ambient
Ext Resistance 100 ohms, maximum
Normal Mode Rejection 60dB Common mode rejection: 120dB
Operating Temperature  4ºF - 122°F (-10ºC-50°C)
Vibration  10-55Hz, amplitude 1 mm Shock: 200m.s (20g)