The Heat Torch™ 200 is engineered to satisfy the most demanding requirements. It is contained in a 2-in. diameter stainless steel pipe and is available in three sizes. The 5-in. long heater body is for power ratings from 1000 to 4250 watts (with power increments of 250 watts). The 9-in. long heater is for power ratings of 4500 to 8500 watts (with standard power increments of 500 watts). The 13-in. long heater is for power ratings from 9000 to 12000 watts (with standard power increments of 1000 watts).
The Heat Torch™ 200 has an allowable compressed air flow ranging from 9.6 to 100 SCFM. Maximum air input temperature is 250°F with 1300°F the maximum output temperature. Standard inlet fitting is a 1-in. NPT female. Standard outlets are 1.25-in. female NPT fitting or no exhaust fitting.
This Heat Torch™ 200 service applications include high capacity staking, curing, drying, heat-shrinking, sterilization, adhesive activation, air scrubbing, and air knives. Designed to heat any non-combustible gas.
|Max Watt||Max Inlet||Max Exhaust||Min SCFM||Max SCFM||PSIG*|
|12500 W||250 ºF||1300 ºF||9.6||100||120|
- Mounting: Horizontal / Vertical
- Leads: 12 Gauge, 12-in. long
- Heater Body: Stainless Steel
- Heater Fittings: Stainless Steel
Applications for the Heat Torch 200:
- High Capacity Staking
- Heat Shrinking
- Adhesive Activation
- Air Scrubbing
- Air Knives
|Airflow (SCFM)||500W - 4250W Pressure Drop (PSIG)||4500W - 8500W Pressure Drop (PSIG)||8750W - 12500W Pressure Drop (PSIG)|
|Wattage||Minimum Flow Required at Max Power Inlet Air Temperature 72º F (SCFM)|